DreamGEAR DGWII-1276 es User Manual
15 in 1 play ers kit plus
FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
15 in 1 Play
ers Kit Plus
Package Contents:
• Wii Remote Cradle
• Baseball Bat extension
• Tennis Racket extension
• Golf Club extension
• Pool Cue extension
• Sharp Shot
• Racing Wheel PLUS
NOTE: The Wii Remote Cradle, Sharp Shot and the Racing Wheel are not compatible
with the Wii Remote Jacket. Be sure to remove the Wii Remote Jacket before
attempting to install.
NOTE: The Wii Remote Cradle, Sharp Shot and Racing Wheel feature an infrared
pass-through which allows the user to make on-screen selections without having to
remove the Wii Remote.
Wii Remote Cradle and Sports Extensions
How to Use the Wii Remote Cradle and Sports Extensions:
1. Place the Wii Remote into the Wii Remote Cradle.
NOTE: The Wii Remote Cradle can be used with or without the Wii MotionPLUS.
2. Depending on which game you are playing, choose the appropriate sports
extension.
3. With the Wii Remote inserted into the Wii Remote Cradle, attach the Baseball Bat,
Tennis Racket, Golf Club or Pool Cue extension to the top of the Wii Remote Cradle
by twisting clockwise until the extension is completely installed.
Sharp Shot
Installing the Wii Remote without Wii MotionPLUS:
1. Open both latches located at the top of the Sharp Shot.
2. Insert the Wii Remote into the Sharp Shot by sliding it into the Wii Remote cradle of
the Sharp Shot (directional pad end first with the buttons facing upward).
3. Slide the directional pad end of the Wii Remote towards the front of the Sharp Shot
until it stops.
4. Close the latch nearest to the “A” button. If you are playing a game that does not
require the Wii Nunchuk™, close the latch located near the back of the Sharp Shot
and you are ready to play. If your game requires the use of the Wii Nunchuk, continue
to step 5.
5. Through the back opening of the Sharp Shot, slip the connector plug of the Wii
Nunchuk under the back latch on the Sharp Shot and connect the Wii Nunchuk to the
Wii Remote. Make sure that the connector cover of the Wii Remote has been removed
before inserting the connector plug of the Wii Nunchuk into the External Extension
Connector of the Wii Remote.
6. Close the back latch.
Installing the Wii Remote with Wii MotionPLUS:
1. Open both latches located at the top of the Sharp Shot.
2. Insert the Wii Remote into the Sharp Shot by sliding it into the Wii Remote cradle of
the Sharp Shot (directional pad end first with the buttons facing upward).
3. Slide the directional pad end of the Wii Remote towards the front of the Sharp Shot
until it stops.
4. Close both latches on the top of the Sharp Shot. If you are playing a game that
does not require the Wii Nunchuk, you are ready to play. If your game requires the use
of the Wii Nunchuk, continue to step 5.
5. Make sure the connector cover of the Wii MotionPLUS bas been removed and
insert the connector plug of the Wii Nunchuk into the External Extension Connector of
the Wii MotionPLUS.
NOTE: The top trigger of the Sharp Shot activates the A button, the bottom trigger
activates the B button. Please refer to your game’s User’s Guide for button configura-
tion.
How to Remove the Wii Remote:
1. If the Wii Nunchuk is attached to the Wii Remote or the Wii MotionPLUS, remove
the Wii Nunchuk first before trying to remove the Wii Remote from the Sharp Shot.
NOTE: Please refer to the Wii Remote’s User’s Guide for Wii Nunchuk removal
instructions.
2. Open both latches located at the top of the Sharp Shot and lift the Wii Remote up
from the back and slide the Wii Remote back until it is completely out of the Sharp
Shot.
Racing Wheel PLUS
How to Install the Wii Remote into the Racing Wheel PLUS with Wii MotionPLUS:
1. Open the latch located on the front of the Racing Wheel PLUS.
2. Insert the wrist strap attached to the Wii Remote through the hole on the Racing
Wheel PLUS and pull through.
3. Place the Wii Remote with Wii MotionPLUS into the wheel so that the directional
button is located on the left side of the wheel.
4. Close the latch to secure the Wii Remote into the Racing Wheel PLUS.
NOTE: Use the pass-through port on the Racing Wheel PLUS to navigate through any
menus.
How to Install the Wii Remote into the Racing Wheel PLUS without Wii MotionPLUS:
1. Open the latch located on the front of the Racing Wheel PLUS.
2. Insert the wrist strap attached to the Wii Remote through the hole on the Racing
Wheel PLUS and pull through.
3. Place the Wii Remote into the wheel so that the directional button is located on the
left side of the wheel.
NOTE: Make sure that the Wii Remote is pushed all the way to the left side of the
Racing Wheel PLUS.
4. Close the latch to secure the Wii Remote into the Racing Wheel PLUS.
NOTE: Use the pass-through port on the Racing Wheel PLUS to navigate through any
menus.
Jeli Grip
1. Carefully slide the Wii Remote Jeli Grip over the Wii Remote.
2. Carefully slide the Wii Nunchuk™ Jeli Grip over the Wii Nunchuk.
Game Grip
1. Remove the battery cover from the back of the Wii Remote.
2. Replace the battery cover with the Game Grips for enhanced control during
gameplay.
Wii Remote Saver
1. Carefully remove backing from the Wii Remote Saver and place onto the front of the
Wii Remote, making sure not to obstruct the movement of the buttons.
• 1 Set of Jeli Grips
• 2 Game Grips
• 2 Wii Remote Savers
• 2 Wrist Straps
• User’s Guide/Warranty Card
• Registration Card