DreamGEAR DGWII-1278 es - Manual

FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or [email protected]
Sharp Shot
NOTE: The Sharp Shot is not compatible with the Wii Remote
Jacket. Be sure to remove the Wii Remote Jacket before attempt-
ing to install.
INSTALLING THE WII REMOTE WITHOUT WII MOTIONPLUS:
1. Open both latches located at the top of the Sharp Shot.
2. Insert the Wii Remote into the Sharp Shot by sliding it into the
Wii Remote cradle of the Sharp Shot (directional pad end first
with the buttons facing upward).
3. Slide the directional pad end of the Wii Remote towards the
front of the Sharp Shot until it stops.
4. Close the latch nearest to the “A” button. If you are playing a
game that does not require the Wii Nunchuk™, close the latch
located near the back of the Sharp Shot and you are ready to
play. If your game requires the use of the Wii Nunchuk, continue
to step 5.
5. Through the back opening of the Sharp Shot, slip the connector
plug of the Wii Nunchuk under the back latch on the Sharp Shot
and connect the Wii Nunchuk to the Wii Remote. Make sure that
the connector cover of the Wii Remote has been removed
before inserting the connector plug of the Wii Nunchuk into the
External Extension Connector of the Wii Remote.
6. Close the back latch.
INSTALLING THE WII REMOTE WITH WII MOTIONPLUS:
1. Open both latches located at the top of the Sharp Shot.
2. Insert the Wii Remote into the Sharp Shot by sliding it into the
Wii Remote cradle of the Sharp Shot (directional pad end first
with the buttons facing upward).
3. Slide the directional pad end of the Wii Remote towards the
front of the Sharp Shot until it stops.
4. Close both latches on the top of the Sharp Shot. If you are
playing a game that does not require the Wii Nunchuk, you are
ready to play. If your game requires the use of the Wii Nunchuk,
continue to step 5.
5. Make sure the connector cover of the Wii MotionPLUS bas been
removed and insert the connector plug of the Wii Nunchuk into
the External Extension Connector of the Wii MotionPLUS.
NOTE: The top trigger of the Sharp Shot activates the A button,
the bottom trigger activates the B button. Please refer to your
game’s User’s Guide for button configuration.
HOW TO REMOVE THE WII REMOTE:
1. If the Wii Nunchuk is attached to the Wii Remote or the Wii
MotionPLUS, remove the Wii Nunchuk first before trying to
remove the Wii Remote from the Sharp Shot.
NOTE: Please refer to the Wii Remote’s User’s Guide for Wii
Nunchuk removal instructions.
2. Open both latches located at the top of the Sharp Shot and lift
the Wii Remote up from the back and slide the Wii Remote back
until it is completely out of the Sharp Shot.
PACKAGE CONTENTS:
• Sharp Shot
• User’s Guide/Warranty Card
• Registration Card