DreamGEAR DGWII-1242 es - Manual

3-in-1 Bundle
Twin Star Sabers
USER’S GUIDE
PACKAGE CONTENTS:
• BLUE Star Saber
• RED Star Saber
• 1 Game
• User’s Guide/Warranty Card
• Registration Card
SET UP:
1. Insert 2 “AAA” batteries into the battery compartment located on the
back of each Star Saber handle.
2. Slide the latches on both sides of the Star Saber upward to unlock the
opening for the remote.
3. Once both latches are unlocked, pull down the back of the Star Saber
handle and insert the Nintendo Wii Remote. Align the Wii Remote buttons
with the appropriate openings in the front of the Star Saber handle.
4. Close the Star Saber handle over the Wii Remote and slide the latches
downward into the locked position.
5. Power the Star Saber ON or OFF with the power button located on the
front of the handle.
NOTE: Always practice safety first. When you are swinging the Twin Star
Sabers, be aware of your surroundings, making sure not to hit anyone or
anything. To prevent injury and property damage, make sure the Wii Remote
is properly and securely attached to your Star Saber and that you are a
reasonable distance from your television and any people around you. The
Twin Star Sabers are accessories designed for gaming ONLY and should
never be used to strike people, objects or other accessories. Always use
your Wii Remote wrist straps when using the Twin Star Sabers.
TROUBLESHOOTING:
Problem: The Star Saber handle will not stay closed.
Solution: Make sure that the latches on both sides of the Star Saber handle
are in the locked position.
Problem: The Star Saber will not illuminate.
Solution: Make sure that the Star Saber is powered ON. Make sure that
there are batteries in the battery compartment. Make sure that the batteries
are fresh and inserted properly and securely.
DISCLAIMER: dreamGEAR is NOT responsible for any personal injury
or damage to property when using this product. It is the user’s
responsibility to practice proper safety procedures.