EVS XFReader Version 2.6 - October 2013 User Manual - Manual (Page 40)

EVS Broadcast Equipment S.A. Issue 2.6.A October 2013
38 SDI Board Installation Procedure
6. SDI Board Installation Procedure
6.1 Install the Card Driver
6.1.1 Blackmagic
To install the SDI card driver, proceed as follows:
1. Get the Blackmagic Desktop Video package from the card package or from the
Blackmagic website (http://www.blackmagicdesign.com).
2. Extract, and run the installer.
3. Follow the on-screen instructions.
6.1.2 DVS
To install the DVS driver, proceed as follows:
1. Download the DVS SDI card driver using the provided link. Once that is done, extract
the download package in the final destination.
Note
The recommended driver version is 4.3.5.8.
2. Run the dvsconf.exe application located in the win32\bin subfolder.
3. Use the browse button to select the driver corresponding to your DVS Card
(Centaurus II LT or Atomix LT).
4. Click the Install button.
Note
The recommended driver version is 9.7.7.