EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 141)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
139
Paint Mode Monitor Display
C (clear) Clears screen
L Enables line mode («one-shot»)
C / c (circle) Selects large / small circle («one-shot»)
A Automatic arrow at end of freehand drawing
D Selects brush color and thickness
Br1 / Br2 Toggles between Brush1 and Brush2
E Erases unwanted portion of graphic
k / >k< Keyer off / on
L calls the Library module where drawing, logos, …
can be saved.
C marks CUE OUT point on current clip
S plays back the clip at slow motion speed. The speed
of slow motion is predefined in the PGM Speed item
from the Setup Menu (Page2 – F3)
P plays back the current clip at normal speed
The clip countdown displays the field time. This means that the
countdown matches the slow motion speed.
Note: Selecting the “C” (clear) from the monitor enters the Clear menu and the DFC menu.
DFC menu allows you to select the brush color from a YUV color palette
If working in network mode, painting can be performed on remote clips as
well as on local clips.