EVS IPDirector Version 6.0 - November 2012 Part 10 User's Manual - Manual (Page 27)

3.4. Sending the EDL
Exporting EDL from Director's Cut
When the show is completed, or any time during the show, as soon as at least one take
has been shot and is completed, you can export the EDL to the destination target.
To send the EDL, click the button from the Takes Grid area.
The system creates and EDL with all the takes recorded so far, and sends it to the
destination target(s).
The EDL file has the same name as the production, with the .xml (FCP) or .aaf (AVID)
extension.
Note
If used, non-linear transition effects between cameras in the director's cut are
converted in simple constant mixes in the EDL.
Recovery of the EDL in Avid Media Composer
With Avid Media Composer, the EDL information is shown as follows:
IPDirector - Version 6.00 - User Manual - Director's Cut
3. Working with Takes 21