Tab 4 – scan folder, Auto restore, Enable autorestore at start – EVS Xfile Version 2.13 - July 2010 User Manual User Manual
Page 41: Enabling configuration, Tab 4 – scan folder), Tab 4 – scan folder: auto restore
Issue 2.13.D
XFile Version 2.13 – User Manual
EVS Broadcast Equipment – July 2010
32
3.3.4 T
AB
4
–
S
CAN
F
OLDER
A
UTO
R
ESTORE
The Auto Restore function enables the automatic restore or copy of files from a
folder to a defined location on an EVS video server. This is done through the GBE
or the SDTI network.
The AutoRestore Mode can be activated from the main XFile window by pressing
the AutoRestore button.
Enable AutoRestore at Start
If the Enable AutoRestore at Start box is selected, the AutoRestore Mode will be
active as soon as XFile is started.
Enabling Configuration
Up to 5 different configurations can be pre-defined. To do so, select a
configuration number in the Config field, fill in all the other fields and press OK.
To enable one of these configurations, select it the Config field, select the Enable
Config box and press OK. Some or all of the predefined configurations can be
enabled.