EVS XFLY Streamer Version 1.02 - April 2013 User Manual - Manual (Page 13)

XFLY.STREAMER – Version 1.02 – User Manual
EVS Broadcast Equipment – April 2013
Issue 1.3
13
5.1 Storage and Processing Device Selection
Thanks to BONJOUR protocol, at start-up, XFLY systems are detected and listed in a
drop-down list.
Clicking on the arrow on the right will display all systems detected. In the dropdown list,
XFly is identified as Machine_Name + EVS_SN.
Note
The local device is displayed on the top of the list with bold letters.
Once a system is selected its capacity information and a related diagram are updated:
The second drop-down list lists all XTAccess detected on the local network via BONJOUR
protocol.
Clicking on the arrow on the right will display all processing devices detected. In the drop-
down list, XTAccess is identified as Machine_Name+EVS_SN+version number.
Note
The local XSquare is always displayed on the top of the list with bold letters.
Remaining Capacity Total Capacity