EVS IPDirector Version 6.0 - November 2012 Part 1 User's Manual - Manual (Page 86)

2. Select the function you want to assign to the button.
The action name is displayed in the button for the selected channel:
Note
If the Apply function to all channels checkbox had previously been selected,
when the operator assigns a function to a button, it is assigned to all the
corresponding buttons for the player channels controlled by the remote. This
modification is done on the selected tab only, not on all the connected MPlay
devices.
How to Use the MPlay Remote
When you have assigned a player channel to the MPlay Remote and configured its
buttons, you can use the device to perform actions on that channel.
1. Associate the same player channel to an IPDirector module such as Control Panel,
Playlist Panel, Database Explorer or AB Roll Playlist interface. You can assign it to
several windows at the same time.
76 3. System Management
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B