EVS MulticamLSM Version 10.04 - January 2011 Operating Manual - Manual (Page 171)

EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
161
If you select Define Colour (DfC), a new screen will appear including a U-V
selection area, and an Y level selection area. Select first the color you want to
edit on the top of the screen, then select the U-V and Y values by moving the pen
on the right location of each selection area. When the adjustment is made, move
the pen to an empty zone of the screen.
The CLEAR function is also available from the Remote Panel (SHIFT + B) No
confirmation is required.
Keyer (K)
Can be selected with the pen, click on K (arrows appear/disappear) on the Paint
Mode monitor display, or press SHIFT + A on the Remote Panel menu. This
feature will cause the drawing to dissolve on and off using the dissolve duration
defined in the Setup menu (Page 1, F6)
Library (L)
Selecting L allows entering into a library where the user can load or save entire
drawings and logos.