EVS XEDIO Manager Version 4.1 - December 2011 User Manual - Manual (Page 37)

Xedio Suite Version 4.1 - User Manual – Xedio Manager
EVS Broadcast Equipment – December 2011
Issue 4.1.D
27
The protocol used between Xedio Ingest Server and the “switching device” uses
the following commands:
Commands sent from CleanGest Server
to the switching device
Description
<ConnectPorts InPort="x" OutPort="y"/> Used before starting a record
<ReleasePorts InPort="x" OutPort="y"/> Used at the end of a record.
The answers received from the device must be as follows:
Received from the software device Description
<ConnectOK/>
<ConnectFailed/> Possible answers following a
“ConnectPorts” command.
<ReleaseOK/>
<ReleaseFailed/> Possible answers following a
“ReleasePorts” command.
<CmdErr/> Error status