EVS XT3 Version 11.01 - November 2012 Configuration Manual - Manual (Page 208)

The following screenshot presents page 1 of the Network tab in the server-based
application, where the OSD settings are available, and highlights the OSD settings area:
Cue number on OSD
Description Enables / disables the display of the cue point number on the
OSD of the output monitors when a cue point is recalled inside
a record train.
Values Yes (default) / No
Keyword info
Description Shows / hides the defined keywords and ranking on the OSD
of the output monitors when the clip is loaded on its Short IN
point.
As soon as the operator starts jogging into the clip or initiates a
playback, this information is removed from the OSD so that
the video content is clearly visible.
Values Yes / No (default)
OSD on outputs
Description Enables / disables the OSD on the play channels.
Values Yes (default) / No
OSD on inputs
Description Enables / disables the OSD on the record channels.
Values Yes (default) / No
XT3 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 198