Moving an element in the playlist, How to move an element in the playlist, The element is moved from above the cued elements – EVS IPDirector Version 6.2 - June 2013 AB ROLL PLAYLIST User Manual User Manual
Page 42

5.5.
Moving an Element in the Playlist
5.5.1.
How to Move an Element in the Playlist
To move an element in the playlist, proceed as follows:
1. Select the element that you wish to move.
2. Drag the element to the desired position in the AB Roll Playlist grid.
The position where the element will be moved is marked by a thick line:
3. Release the element at the desired position in the grid.
5.5.2.
Impact on the Channel Association with
Recue Mode OFF
The Element is Moved from above the Cued
Elements
The channel assignment is not modified when the element is moved and inserted above or
between the cued elements. Therefore, the channel order is affected.
When the element is moved and inserted below the cued elements, the channels
assigned to the elements from the insertion point are resorted according to the ABCD
sequence.
Cued elements always remain cued.
34
5. Playlist Editing
EVS Broadcast Equipment S.A. - June 2013
Issue 6.2.A