EVS IPDirector Version 5.9 - January 2011 Part 1 User’s Manual - Manual (Page 74)

IPDirector Version 5.9 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment -– January 2011
Issue 5.9.B
63
• from Output GPIs to Input GPIs: the configuration of the last 4 Output GPIs is
cleared.
• from Input GPIs to Output GPIs: a message will warn the user that the TTL
GPIs may be used as Input GPIs in playlist, playlist macro command or
timeline macro command.
I
NPUT
GPI
S
S
ETTINGS
The Input GPIs settings make it possible to configure the action to be triggered on
a given player channel of the EVS server when a given key is pressed on a GPI
connected to this EVS server.
Up to eight GPI inputs can be used on an EVS server.
For each Input GPI, the following information needs to be defined:
• the action triggered by the GPI key on the EVS server.
• the player channel on which the action needs to be executed.
• the type of trigger signal sent by the GPI to EVS server.