EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 194)

See section "Possible Audio Transition Effects" on page 175 for more information on the
various types of transition effects.
The following audio transition effects are available: Cut, Fade OUT, Fade IN, and Cross
Fade.
How to Apply Audio Transition Effects On
Elements on the Same Track
To apply audio transition effects to one element or contiguous audio elements of the same
track, proceed as follows:
1. If you want to define a transition effect on several contiguous transitions, set a mark
IN and mark OUT points to cover the clips on which the effects should be applied.
Otherwise, the transition effect will be defined on the nearest transition to the position
of the mouse cursor.
2. Right-click the mouse on the track where you want to define the transition effect
either:
◦ near the clip transition OR
◦ between the define mark IN and mark OUT
The contextual menu is displayed:
3. Select the requested effect type in the (Left / Right) Audio Transition command.
The Audio Transition Effect window opens. In this window, you can still select another
effect. The definition of the transitions where the effect will be applied, in the Area
group box, cannot be modified.
178 10. Advanced Audio Editing
EVS Broadcast Equipment SA Issue 4.35.B - August 2013