1 xtaccess.log, 2 xtaccess_jobs.log, 3 xttransfer.log – EVS XTAccess Version 1.17 - May 2012 User Manual User Manual
Page 106: 4 xml_scan.log, 5 xtaccess_ui.cvs, Xtaccess.log, Xtaccess_jobs.log, Xttransfer.log, Xml_scan.log, Xtaccess_ui.cvs
Issue 1.17.C
XTAccess Version 1.17 – User Manual
EVS Broadcast Equipment – May 2012
98
29.2.1 XTAccess.log
XTAccess.log lists all the transactions and actions performed by XTAccess. It provides
detailed information for debugging.
Useful error messages are:
•
Error 426: XT Transfer Cancelled due to a disconnection with XT server
•
Read Slow: The data block to read has not been reached within a few seconds
(typically 15 seconds).
•
Write Slow: The data block to write has not been reached within a few seconds
(typically 15 seconds).
29.2.2 XTAccess_Jobs.log
This log can be used as an as-run log. Each job is listed with useful information:
•
Type of job
•
Source path or IP address
•
Destination path or IP address
•
Start and end time
•
Status of job
•
Error message displayed on XTAccess Monitoring GUI (if any)
29.2.3 XTTransfer.log
Specific log for XTTransfer based on FTP Proxy (XT Copy, Avid Transfer). RPC
commands are listed.
29.2.4 XML_Scan.log
Specific log for the Scan XML. You can see log from the XML engine.
29.2.5 XTAccess_UI.cvs
Specific log where you can find the entire job done by XTAccess.