EVS Xedio Approval Version 4.35 - August 2013 User Manual - Manual (Page 28)

Here is an example with 4 tracks of stereo channels:
The different types of audio tracks of a loaded media or clip are displayed as follows:
• A mono track is represented by
• A stereo track is represented by .
• A 5.1 track is represented by
Note
If the loaded media/clip contains more than 8 audio tracks, only the first 8 tracks
are displayed under the Video Display. A first click on the button allows to
display the additional tracks.
Video and Audio Tracks Selection
Selection of the Video Channel
The Video button is clicked to select or remove the video. So the clip contains, or not,
the video.
Selection of an Audio Channel
The left and the right loudspeaker buttons of an audio stereo track are used to
select or remove respectively the left or the right channel of the corresponding audio track:
Clicking the left audio button will remove the left audio component from the source so that
the clip has no left audio channel. In this case, the right channel will be output on the left
and right channels.
Clicking both left and right audio buttons will also remove the right audio component so
that the clip has no audio channel for this track.
20 3. Player
EVS Broadcast Equipment SA Issue 4.35.B - August 2013