Counters, Clip list information – EVS Xfile Version 1.02 - February 2009 User Manual User Manual
Page 21
Issue 1.02.D
XFile Lite Version 1.02– User Manual
EVS Broadcast Equipment – February 2009
16
C
OUNTERS
A counter of clips is available in the Work tab in the upper side of the list.
The first value is the number of clips displayed in the list, the second value
is the total amount of clips in memory (contents of path(s) + external folder
+ clips scheduled).
The number of items in the different lists can affect the performance of the
system. So it is advised to reduce the number of clips displayed in the lists.
When the total amount of clips displayed in the list exceeds 2000 clips, the
counter lights orange.
When the total number of clips displayed in the list exceeds 4000 clips, the
counter lights red. If the total number of clips exceeds 5000 clips, the
refresh of the list stops and the counter displays + 5000+.
Another counter is available in the Selection tab:
It displays the number of clips added to the selection via a cut or copy
action.
C
LIP
L
IST
I
NFORMATION
In the Work and Selection tab, each record of a clip displayed in the Clip
List includes clip information. The main fields displayed in the Clip List are
explained in the table below:
Clip Information Description
Sel.
tab
Full Clip ID
Displays ID assigned to the clip using its page,
bank, clip and camera number.
√
Status
Displays the selection status of the clip, i.e.
‘copy’ or ‘cut’.
√
ID Material
Displays ID assigned to the video material and
which is unique on the SDTI network
√
UmID
Displays the 8-bytes ID with fixed length
assigned to the clip and used for the unique clip
identification on the SDTI network.
√
VarID
Displays the 32-bytes ID with variable length
assigned to the clip.
Markers
Displays the markers defined for the clip.
Rating
Displays the interest level assigned to the clip.