Associating the log and recorder time code tables – EVS IPDirector Version 5.9 - January 2011 Part 2 User’s Manual User Manual
Page 31
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 2 – Logging
EVS Broadcast Equipment – January 2011
20
A
SSOCIATING THE
L
OG AND
R
ECORDER
T
IME
C
ODE
T
ABLES
When selecting a relevant recorder, the system will automatically consider the
primary table of the log sheet and the recorder as the relevant tables to calculate
the clip/log association.
It is however possible to change this association if necessary. To change the
association, proceed as follows:
1. Right-click the relevant recorder in the list.
2. Select the desired association type.
Note
If you have different types of associations in the same log sheet, a
warning message is displayed.
This is just a warning which indicates you have different types of
association in your log sheet. Check that this scenario (rarely used)
corresponds to your workflow.