EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 115)

• On GPI: the selected element will be started when a GPI trigger is received on the
corresponding EVS server (the one the playlist is to be played on). The GPI number
and its trigger mode are defined in the Tools > Settings > Input GPIs category.
Refer to section "Settings – Input GPIs" in part 1 of the manual.
When On GPI is selected, the corresponding GPI, which has been configured to start
a PLAY command on the channel associated to the Playlist Panel, is displayed in the
description field.
If no GPI has been configured to start a PLAY on the channel, a warning message is
displayed in the description field.
If no channel is defined, a warning message is displayed in the description field:
• On Time, at:
the selected element will start at the defined time.
◦ Start-on-time: the playout will only be started if the element is loaded on the
channel at the specified time (independently of the date).
A clock icon and the defined time are displayed in the Playlist grid.
◦ Jump-on-time: the playout will be started even if the element is not loaded on the
channel as far as the playlist is loaded on the channel.
A clock icon and the defined time are displayed in the Playlist grid.
Note
Manual Override on Start mode settings:
If the start mode has been defined On GPI, or On Time, at, it is still possible to
manually start the element by clicking PLAY.
6.4.5. How to Define a Start-on-Time Condition
To define a start-on-time condition on a playlist element, proceed as follows:
1. Select the element on which to define a start on time condition.
2. Right-click the element.
The Playlist Element contextual menu is displayed.
3. Select Define Start mode from the contextual menu.
IPDirector - Version 6.2 - User Manual - Playlist Panel
6. Playout Effects and Parameters 101