EVS XSnano Version 11.02 - July 2012 Configuration Manual - Manual (Page 83)

Vertical Interp. (Vertical Interpolation)
Description Enables or disables the two-line interpolation process.
Values • No (default)
• Yes
Four Lines
Description Enables or disables the four-line interpolation process.
Values • No (default)
• Yes
3.3.5. PC LAN Settings
User Interface
The PC LAN settings allow the MTPC board of an EVS server to communicate and
exchange information with other EVS hardware on a setup.
The PC LAN settings are displayed on the Server tab in the server-based application
and web-based interface in the advanced mode.
The PC LAN settings are highlighted in the screenshot of the server-based application
shown below:
Note
The PC LAN settings are read-only in the Multicam Configuration window. You
can modify them in the Multicam Setup window, using the Set LAN PC
address command. See section "Setting the Server LAN PC Address" on page
25 for more information.
CONFIGURATION MANUAL XSnano Server 11.02
3. Multicam Configuration 75