Display pm coverage, Properties – EVS IPDirector Version 5.6 - May 2009 Part 2 User's Manual User Manual
Page 17

Issue 5.6.D
IPDirector Version 5.6 – User Manual – Part 2 – Logging
EVS Broadcast Equipment – May 2009
6
D
ISPLAY
PM
C
OVERAGE
Clicking the Display PM Coverage button on the toolbar opens the window
Protect Media Coverage.
You can check here whether all the relevant media is
protected.
This window displays a time line for each relevant recorder. The log entries are
shown as vertical lines. A/V data that is protected, is marked with a green
background.
If the Protect All command has not yet been executed, the time lines are white.
Once the Protect All command has been executed, green bars mark the protected
media.
P
ROPERTIES
The properties that were entered when the log sheet was created, can be edited
later.
Clicking the Properties button on the toolbar opens the window Update a Log
Sheet Wizard.
From this window, you can open all the log sheet properties and make any
required changes.