EVS XTAccess Version 1.10 - July 2009 User Manual - Manual (Page 74)

XTAccess Version 1.10 – User’s Manual
Author: Serge Comes - EVS Broadcast Equipment – July 2009
Issue 1.10.D
73
<!-- MPEG-2 / MPEG-1 -->
<VRate>1500000</VRate>
<GopN>18</GopN>
<GopM>3</GopM>
<AspectRatio>Auto</AspectRatio>
<ARate>64000</ARate>
<Stereo>1</Stereo>
<Half>1</Half>
</EVSEncoderCfg>
</EVSEncoder>
All the Tags are explained into the XML Encoders Schema document into the
EVSMPEG2Encoder.dll chapter.
16.2 IMX 30
IMX codec uses the EVSIMXEncoder dll encoder (C:\Program Files\EVS Broadcast
Equipment\XTAccess\EVSEncoders\EVSIMXEncoder.dll) which is installed with
XTAccess.
You can find here an example of IMX encoder profile. This profile can be found
into C:\Program Files\EVS Broadcast Equipment\XTAccess\Encoder
Profiles\Default EVS Profiles\ folder after the installation of XTAccess.
IMX_XTATranscode.profile.xml :
<?xml version="1.0"?>
<EVSEncoder version="1.0">
<DllName>EVSIMXEncoder.dll</DllName>
<DisplayName>IMX</DisplayName>
<Extension>mxf</Extension>
<ResolutionMode>0</ResolutionMode>
<EVSEncoderCfg>
<FType>EVS</FType>
<!-- MXF / MOV / AVI / EVS -->
<VRate>30000000</VRate>
<AspectRatio>Auto</AspectRatio>
<Stereo>0</Stereo>
<MXFSamplesPath>C:\Program Files\EVS Broadcast Equipment\XTAccess\MXF
Templates\</MXFSamplesPath>
</EVSEncoderCfg>
</EVSEncoder>
All the Tags are explained into the XML Encoders Schema document into the
EVSIMXEncoder.dll chapter.
16.3 MJPEG EVS PROXY
MJPEG codec uses the EVSMjpegEncoder dll encoder (C:\Program Files\EVS
Broadcast Equipment\XTAccess\EVSEncoders\EVSIMXEncoder.dll) which is
installed with XTAccess.
You can find here an example of MJPEG encoder profile. This profile can be found