EVS XEDIO Cutter Version 4.2 - June 2012 User Manual - Manual (Page 34)

Issue 4.2.B Xedio Suite Version 4.2 – User Manual - Xedio Cutter
EVS Broadcast Equipment – June 2012
26
3.6 MAKING A CLIP
When a media has been loaded on the Player Panel, a clip can be made from the
media.
To do so, proceed as follows:
1. Determine the IN point for the clip in one of the following ways:
• use the transport functions, or
• drag the nowline to the selected position, or
• enter a value in the IN field
2.
Click the button to mark the IN point.
On the video display, a ‘ [ ‘ is shown on the frame and a green line appears
on the media bar.
3. Determine the OUT point for the clip in one of the following ways:
• Use the transport functions, or
• Drag the nowline to the selected position, or
• Enter a value in the OUT field.
4.
Click the button to mark the IN point.
On the video display a ‘ ] ‘ is shown on the frame and a red line appears on
the media bar.
5. If needed, select the audio for the clip.
6. Enter a name for the clip in the Clip Name field.
You can then use the clip in the Storyboard.