Configuration, 1 overview, 1 connection steps – EVS EPSIO Version 1.60 - July 2010 User's Manual User Manual
Page 12: 2 configuration steps, Overview, Connection steps, Configuration steps, Onnection, Teps, Onfiguration
Epsio Version 1.60 – User’s Manual
EVS Broadcast Equipment – July 2010
Issue 1.60.C
7
2. Configuration
2.1 OVERVIEW
The configuration in order to use Epsio with an EVS server has to be performed in
the Epsio application or on the EVS server side (via the EVS menu and the LSM
Remote Panel), depending on the configuration step.
2.1.1 C
ONNECTION
S
TEPS
Before you can actually configure Epsio, you first need to set up Epsio and the
EVS server to communicate with each other:
# Step
Where?
See
section
1.
Starting the appropriate EVS server
application
EVS server
2.
Activating the connection between
Epsio and the EVS server
Remote Panel
3.
Checking the video feeds
Epsio
2.1.2 C
ONFIGURATION
S
TEPS
Once Epsio and the EVS server are properly connected, you can perform the
actual configuration steps.
# Step
Where?
See
section
1.
Calibrating the cameras
Epsio
2.
Configuring the Chroma Key settings
Remote Panel
or Epsio
3.
Customizing and loading the graphic
suite
Epsio
4.
Defining the Replay settings
Remote Panel