EVS XTnano Version 11.02 - July 2013 Configuration Manual - Manual (Page 141)

Setting Name Basic & Advanced Technical Setup
SD Edge Enh. X X
REC HD->SD Low latency X X
3.6.2. Multiviewer Settings
User Interface
The Multiviewer settings allow specifying the settings related to the Multiviewer display
such as the number of channels to combine and display, the audio and output video
configuration.
These fields are available in the Multicam Configuration window, Monitoring tab .
Note
The Multiviewer settings will only be displayed if a Multiviewer board is present
on the EVS server.
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the Multiviewer settings area.
Layout
Description Specifies how the sources are displayed on the Multiviewer
screen.
Values • 4 (2+2)
• 6 (4+2)
• 6 (3+3)
• 8 (3+3+2) (not useful on all servers)
Default value • 4 (2+2) for 4U servers
CONFIGURATION MANUAL XTnano Server 11.02
3. Multicam Configuration 133