EVS IPDirector Version 6.2 - June 2013 CONTROL PANEL User Manual - Manual (Page 102)

9. Transferring Media
9.1. Possible Transfer Destinations
You can send clips to the following destinations from the Control Panel:
• the user's default bin, if any
• the default playlist, if any
• a default archive target
• any target destination visible on the GigE network that has been defined in the
Remote Installer (CleanEdit targets, Avid targets, Final Cut Pro targets, File targets,
XT targets).
• the EVS servers for which the user has visibility right
• the bins configured in IPDirector and for which the user has write access right.
9.2. Transfer Monitoring
Transfers can be monitored from different areas, would they be scheduled, on-going,
finished or failed.
• The Transfer Monitoring window is accessed from the Transfer Monitoring option of
the main window Tools menu.
• The Transfer Monitoring area can be displayed in the Database Explorer by selecting
the Transfer Monitoring option from the Database Explorer Tools menu.
• From the Control Panel, the Transfer Monitoring window can be accessed by
selecting the Transfer Monitoring option from the Clip Sent to List contextual menu,
available when you right-click it.
See the General Functions user manual for more information on the Transfer Information
window.
9.3. How to Send a Clip to an External
Destination
To send a clip to one of the possible destinations, proceed as follows:
1. Load the clip in the Control Panel.
2. Right-click anywhere in the Control Panel (except in the Linked to Clips list and in the
Clip-List tab).
3. Select the requested destination from the Send to contextual menu.
92 9. Transferring Media
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A