Vtr control panel, 1 introduction, 1 purpose – EVS IPDirector Version 5.6 - May 2009 Part 4 User's Manual User Manual
Page 62: 2 overview of the display modes, Urpose, Verview of the, Isplay, Odes
IPDirector Version 5.6– User Manual – Part 4: Ingest
EVS Broadcast Equipment – May 2009
Issue 5.6.D
51
3. VTR Control Panel
3.1 INTRODUCTION
3.1.1 P
URPOSE
The purpose of the VTR Control Panel is to control a VTR (Video Tape Recorder)
from IPDirector. It is an advanced remote control, from within the IPDirector
application.
Apart from playback and record control, it also allows the extraction of clips from
a tape to the XT[2] servers. This process can be done with an individual “auto-
edit” or multiples can be “batch digitized”.
3.1.2 O
VERVIEW OF THE
D
ISPLAY
M
ODES
The VTR Control Panel has 3 display modes:
•
transport mode
•
auto-edit mode
•
batch list mode
The display modes are controlled by the buttons in the top right corner of the
initial VTR Control Panel window.
Button status
Display mode
Transport mode
Auto-edit mode
Batch list mode
To select a display mode: click the corresponding block (top left / top right /
bottom).