EVS GX Version 1.5 - September 2011 User’s Manual - Manual (Page 31)

GX server – Version 1.5 – Users Manual
EVS Broadcast Equipment – September 2011
Issue 1.5.A
23
H
OW TO
S
TART AND
S
TOP THE
GX S
ERVER
The GX server can be started and stopped by clicking the switch icon in the
bottom right corner of the window. This button is a toggle button and works as
follows:
• To start the GX server, click on O.
The icon changes from to
• To stop the GX server, click on I.
The icon changes from to
P
RINCIPLES
A
BOUT
S
TARTING THE
S
ERVER
Once the GX server is switched on, users can connect to and work on the server
via the web interface.
The following principles apply with a GX server:
• The GX server is not automatically started when it is switched on.
• Users need to start the GX server manually via the Start Server button in
the web interface when they want to play out the prepared fill and key clips.
• The GX server will only respond to the commands from the control protocol
once the GX server has been started.
• When the GX server is started, it is not possible to import original sequences
and/or create GX clips via the web interface until the server is stopped.