Xt[2, Ow to copy a, Lip to an – EVS IPDirector Version 5.6 - May 2009 Part 3 User's Manual User Manual
Page 53: Through the, Igabit, Thernet
Issue 5.6.D
IPDirector Version 5.6 – User Manual – Part 3 – Browsing
EVS Broadcast Equipment – May 2009
42
4.8.3 H
OW TO COPY A
C
LIP TO AN
XT[2]
THROUGH THE
G
IGABIT
E
THERNET
It is possible to copy a clip to an XT[2] belonging to the same or another SDTI
network through the TCP/IP network via the Gigabit Ethernet connection. For more
information, refer to the Technical Reference manual.
To copy a clip to an XT[2] server, proceed as follows:
1.
Right-click the clip line or XT clip line corresponding to the clip you want to
copy to another XT.
The clip contextual menu is displayed.
2
Select Copy by GigE from the menu and the server you want to copy the
clip to from the Send To sub-menu.
The clip is copied and the
icon appears in the Status column.
Note
When copying a clip to another XT from the same network, this option
can be used rather than the Send to > XT option to avoid the creation of
a target.