GE Healthcare Dynamic Vue - Manual (Page 2)

Features
• Exclude frames with motion
artifacts and sum selected frames
to review a single high-count
images series.
• Application of regions of interest
(ROIs) for cardiac perfusion
analysis.
• Ability to chart time activity curves
between regions of interest (ROIs)
in each brain hemisphere for
comparison.
• Sum an entire series over time or
one location with a single click.
• Reframe a dynamic series to
create a new series by summing
different time frames.
• Draw a freehand region of interest
(ROI) on an image and edit its
properties.
• Create location activity curves for
multiple regions of interest (ROIs).
• Export curve statistics to a portable
format.
• Cine images can be displayed at 40
fps.
Regulatory Compliance
This product complies with the
European CE marking regulation
following Medical Devices Directive:
Directive 93/42/EEC.
System Requirements
Dynamic VUE can be installed on
any AW 4.2p or higher system.
To take full advantage of Dynamic
VUE functionalities, dynamic, e.g.
cardiac, neuro, oncology images
have to be acquired on a GE
Discovery PET/CT system
equipped with dynamic acquisition
capabilities
Indications for Use
The display, processing, archiving,
and communication of data acquired
by Emission
Tomography cameras used in
diagnostic radiology, including
procedures for planar
imaging, whole body imaging,
tomographic (SPECT) imaging,
positron imaging by
coincidence, attenuation correction,
and anatomical
image registration
© 2012 General Electric Company.
All rights reserved. Data subject to change.
GE and GE Monogram are trademarks of General Electric Company.
* Trademark of General Electric Company.