Hafele EN 372.67 Series - Manual (Page 2)

2
Foreword
By choosing the verso/strato lift-up fitting, you have opted for a fitting solution that is technically very advanced and
mechanically very efficient. Your verso/strato lift-up fitting is manufactured with extreme care and precision and goes
through numerous quality and safety checks in order to ensure that it operates smoothly and safely.
1. IMPORTANT SAFETY NOTICE
Installation must be carried out in accordance with the assembly instructions; otherwise there is a risk of
injury.
2. The present verso/strato lift-up fitting is only suitable for the intended use as a lid support for living room, bath,
kitchen and office furniture according to the weight printed on the fitting. The manufacturer is not responsible for
any losses or damage resulting from other uses.
3. The observance of the assembly instructions as prescribed by the manufacturer also form part of the agreed use.
4. Also take into account the general legal and miscellaneous regulations and legal provisions that are applicable – even
those that apply in the operator’s country – as well as the applicable environmental protection regulations. The regula-
tions of the trade associations or other supervisory authorities that are in force locally must always be observed.
5. The manufacturer cannot be held responsible for any losses or damage resulting from unauthorised modifications to
the verso/strato lift-up fitting.
IMPORTANT SAFETY NOTICE
The metal frame and the used gas suspension resp. damping elements of the fixture must not be opened under any
circumstances, as the internal components are under a lot of tension and there is a risk of injury.
Provided the above guidelines are adhered to, you will enjoy many years of satisfaction from your verso/strato lift-up fitting.
For any further questions please do not hesitate to contact us.