Herman Miller Embody Chairs - User Adjustments - Manual (Page 2)

Adjustment Guide 2 HermanMiller Embody ® Chair
Arm Width:
Arm Height: Button underneath each arm
To raise arms:
Grasp arms while pressing button on
the underside of each armpad and pull
up to desired position. Release button
to lock.
To lower arms:
Grasp arms while pressing button on
the underside of each armpad and
lower to desired position. Release
button to lock.
For maximum comfort, your arms should make contact with the arm pad
without any lift at your shoulders.
To adjust arm width:
Place two hands on one armpad to
pull in or push out. Repeat with other
armpad.
In the proper position, your elbows should be in line with your shoulders.
BackFit ™ Adjustment: Knob on right side behind seat.
Only available on some models.
For a flat back, rotate forward:
Turn the BackFit adjustment knob
clockwise to the full forward position
or move it slightly back by turning knob
counterclockwise.
For a curved back, rotate backward:
Turn the BackFit adjustment knob
counterclockwise to rotate the back
rearward.
Adjust the BackFit to position the back of the chair to fit the curvature of your
entire back, placing your head in a balanced position for alignment with your
computer display.