Herman Miller Aeron Chairs - Disassembly For Recycling - Manual (Page 9)

Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Aeron, Co/Struc and Mirra are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 9
Part no. 1b9vtf rev A.
30. Using #2 phillips head
screwdriver, remove and
discard (2) screws securing
pneumatic control end to
swing arm.
32. Using pliers, twist off
appropriate tilt knobs from
lever of tilt control.
31. Remove pneumatic
cable assembly from chair
and dispose of properly.
33. Using #2 phillips head
screwdriver, remove the
screws from tilt control cover.