Herman Miller Mirra Chairs - Disassembly For Recycling User Manual
Page 8
Z
© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Mirra, Co/Struc and Embody are among the registered trademarks of Herman Miller, Inc.
TM
Sense, Setu, Tu and SAYL are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
8
Z
Part no. 1b9rtg rev B.
27. Remove lumbar bow.
28. By hand, separate right side
cover from left side cover. Some
force and slight twisting of cover will
be necessary to disengage S-clips
holding covers together. Repeate
same step for opposite side.
29. Pull up on hinged top at
center, to disengage retaining
loops and open hinged top.
If required.
26. Remove lumbar adjustment
knob by removing the T-40
Torx screw and by pulling knob
straight off by hand.