Setting and changing the camera menu items, Setting procedure – Panasonic AW-RP555 User Manual
Page 38
37 (E)
Setting procedure
1. Keep pressing the MENU/ button for two seconds.
The menu mode is established, and the on-screen menus of the camera in the pan/tilt
head system currently selected are displayed. At this point, the MENU/ button lamp
remains lit.
If the MENU/ button is held down for at least two seconds while the MENU/ button
lamp is lit, the menu mode is exited, and the on-screen menus can be closed.
2. When the unit is in MENU mode, the MENU/ button, ITEM/ button, YES/ button
and NO/ button correspond to the 4 switches on the back of the convertible camera
as shown below. The MENU is operated using these buttons.
MENU/ .......MENU
ITEM/ .........ITEM/AWC
YES/ .........YES/ABC
NO/ ..........NO/BAR
For details about MENU operations, refer to the operating instructions of the camera.
3. Upon completion of the settings, keep pressing the MENU/ button for two seconds to
exit the menu mode. The on-screen menus are now cleared, and the MENU/ button
lamp goes off.
Do not close the on-screen menus by performing menu operations.
If the menus have been closed by mistake, keep pressing the MENU/ button for at
least two seconds to turn off the MENU/ button lamp.
Setting and changing the camera menu items