High Lifter Lift Kit for Honda 300 2x4 (93-02) - Manual (Page 5)

Rear Lift
1) Place jack under ATV at the rear of the bottom skid plate and lift until the weight is off of the
suspension. Be careful to secure the ATV properly so as not to fall off the jack.
2) Remove the bottom of the shock and one bolt on the skid plate that covers the brake housing.
3) After removing the shock, jack the ATV up 1”-2” further.
4) Insert the two Rear Flat Brackets and the Medium Spacer on the shock mount. Placing the Flat
Brackets on the outside of the shock mount tabs and the spacer in the center of the tabs. Secure it with
the one 10x70 hex head bolt and 10mm lock nut.
5) Now attach the shock to the Flat Brackets and the rear support bracket. Using the 10x70 hex bolt and
10mm Locknut.