High Lifter Lift Kit for Honda Rincon 680 (06-14) User Manual

Page 4

Advertising
background image

Steps for installing the Front Lift “L” Brackets:

1. Insert one 10x50 hex bolt into the “L” bracket and slide it into the shock through the spacer.












2. Connect the second “L” bracket to the other side and secure it with the 10mm Lock Nut.
Note: Keep bolts loosely fasten, until the 6x45 hex bolt is inserted.












3. Insert the 6x45 hex bolt with the 6mm washer into the front of the brackets sliding in through

above the spacer and securing it with the 6mm washer and lock nut on the backside.

Note: Once the 6x45 hex bolt is installed fasten it tight, then fasten the 10x50 bolt tight.
















4

Advertising