High Lifter Lift Kit for Honda Foreman 500 (12-13) - Signature Series - Manual (Page 3)

Front Lift Installation
1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to
support ATV properly so that it’s secure, but so that the A-arms and shocks can droop to full
extension.
2) Remove front wheels and top of the shock.
3) Insert the Long Front Lift bracket to the front of the ATV, running it from one shock mount to the
other.
4) Place the Spacer in the shock mount on the frame and connect the Small Front Lift bracket to the
inside of the fame using a 10x45 hex bolt and 10mm lock nut.