High Lifter Lift Kit for Suzuki King Quad 500 - Signature Series - Manual (Page 3)

3
Front Installation
1. Place jack under center of the ATV front end and lift until front wheels clear the ground. Be careful to
support ATV properly so that it’s secure, but so that the A-arms and shocks can droop to full extension.
2. Remove front wheels and disconnect the shocks from the A-arms.
3. Insert the 10x60 hex bolt through the front lift bracket.
4. Next place the spacer into the shock mount tab, then insert the bolt through the shock mount tabs and
spacer.
5. Attach the second Front Lift Bracket to the shock tab. Fasten the brackets to the shock mount with the
10mm lock nut.