Front lift installation – High Lifter Lift Kit for Ranger IRS - Signature Series 3 User Manual
Page 3
Advertising
3
Front Lift Installation
1) Place ATV transmission in park. Place jack under center of ATV front end and lift until front wheels
clear the ground. Be careful to support ATV properly so that it is securely supported so that A-arms
and shocks can droop to full extension.
2) Remove front wheels.
3) Remove the bottom of the front shocks.
4) Place the Right lift bracket next to the front shock mount. Connect the lift bracket to the frame using
the 10mm x 70mm hex bolts and 10mm lock nuts. Insert the Large spacer between the shock mount
tabs.
Advertising