High Lifter Lift Kit for Honda Recon 250 (97-08) - Manual (Page 2)

Parts Diagram
Front Lift
1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to
support ATV properly so that it is securely supported but so that A-arms and shocks can droop to full
extension.
2) Remove front wheels and shocks.
3) Slide bottom of lift bracket over A-arm shock mount and insert new. Place one large spacer between
the center of the shock mount tabs and bracket.
4) Now insert the 10 x 60 hex bolt and secure the bracket to the frame with the 10mm Locknut.