High Lifter Lift Kit for Polaris 900 XP Ranger - Signature Series User Manual

Page 8

Advertising
background image

8

14) Next connect the sway bar and factory sway bar bracket to the new sway bar relocation bracket. Insert

the 10x85mm hex bolt through the factory sway bar bracket into the new hole you drilled where the
grease fitting use to be located.

15) Now insert the third 8x25mm hex bolt through the sway bar bracket and the new sway bar relocation

bracket. Securely tighten all three lock nuts once they are all in place.

16) Fasten the sway bar nut on the sway bar connecting rod. Place the wheels back o the UTV and torque

all lugs to factory specifications.













Advertising