High Lifter Lift Kit for Polaris 800 Ranger RZR & RZR 800 "50" - Manual (Page 4)

4
5) Insert the Large Spacer between the shock mount tabs. Connect the Front Lift brackets to the frame
using the 10mm x 70mm hex bolts and 10mm lock nuts.
6) Next, insert the bottom of the shock into the top of the bracket. Place the 10mm flat washers inside of
the bracket on either side of the shock.
7) Insert the 10mm x 110mm hex bolt through the bracket and shock. Connect the stabilizer rod and
spacer to the outside of the lift bracket and fasten using the 10mm lock nut.
8) Repeat steps for opposite side.
9) Lower the jack and place the wheels back on the ATV.