High Lifter Lift Kit for Honda Rubicon 500 (01-13) - Signature Series - Manual (Page 3)

Front Lift Installation
1)
Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to
support ATV properly so that it’s secure, but so that the A-arms and shocks can droop to full
extension.
2)
Remove front wheels and top of the shock.
3)
On the right side of the ATV, where the top of the shock connects to the frame there is a wire hook
that holds a connecting clip. You will need to unhook the clip from the wire hook. With a pair of
pliers, mash the clip flat.
4)
Using the zip tie provided, secure the wire connecting clip out of the way of the front lift bracket.
5)
Insert the Long Front Lift bracket to the front of the ATV, running it from one shock mount to the
other.