High Lifter Daylight Kit for Honda Rincon 650 - Manual (Page 2)

High Lifter Products, Inc.
RINCON DAYLIGHT KIT
Wiring Diagram
Blue / Black Stripe=High Beam
(Honda Factory Light Wiring)
White= Low Beam (Honda Factory Light Wiring)
Green= Ground (Honda Factory Light Wiring)
Quick Connector
*Supplied with kit
*Insert onto light bulb
To Honda Factory Lights
Quick Splice Connectors
*Supplied with kit
Black= Ground On Wiring
Supplied With Kit.
Red= High Beam On
Wiring Supplied With Kit.
White= Low Beam On
Wiring Supplied With Kit.
1. Expose Honda factory wiring by cutting about a 3” slit in the wire sheathing that comes from the factory
headlights under the front fenders. Be careful not to cut into the wiring.
2. Using quick connectors supplied start splicing the wiring into the factory Honda wiring.
3. Splice Red wire on wiring supplied to Blue wire with Black stripe on the Honda factory wiring.
4. Splice White wire on wiring supplied to White wire on the Honda factory wiring.
5. Splice Black wire on wiring supplied to Green wire on Honda factory wiring.
6. Test the light to make sure connections are secure and everything is working correctly.
7. Finish the job by taping the connections and sheathing back up.
8. That’s it!