High Lifter Lift Kit for Yamaha Rhino 700 (08-13) - Manual (Page 4)

5) Slide bottom of the shock into top of the lift bracket. Insert the small spacer between the shock and the
bracket. Then insert the 10 x 60 hex bolt, but do not attach the 10mm locking nut yet!
6) Secure the lift bracket to the A-arm using one long brace bracket and one short brace bracket.
Sandwich the A-arm with the two brackets with the ¼ x 1 ¾ hex bolts and ¼” locking nut. Now
attach the brace brackets to the top of the lift bracket securing the bracket with the 10mm locking nut.
7) Repeat the procedure for the other side.
8) Make sure all bolts are tightened to manufacturer’s torque specifications.
9) Install the wheels, torque wheel lug nuts to manufacturer’s specifications, lower and remove jack.
Check for clearance problems or misalignment.