Sony DPP-SV88 - Manual (Page 102)

102 GB
Using your printer with Macintosh computers
The supplied software enables you to print an image from your Macintosh
with the Digital Photo Printer DPP-SV88. To print an image from the
computer, you need a commercially available printing software application.
System requirements
To use the supplied software, you need a Macintosh computer that must meet
the following system requirements.
OS: Mac OS 8.5.1/8.6/9.0/9.1/9.2 should be pre-installed.
Port: A USB port should be installed as standard.
RAM: 32 MB or more (64 MB or more is recommended.)
Hard disk space: 50 MB or more (depending on the number of copies to
be printed.)
Drive: CD-ROM drive (for software installation)
Notes
• We cannot guarantee the printer operations when a hub is used or when two or more
USB devices are connected to your computer.
• If you connect more than one DPP-SV88/SV77/SV55 printer at the same time, you
cannot operate the printer.
• You cannot operate the printer from another USB device being used simultaneously.
Installing the printer driver
Install the Sony DPP-SV88 Printer Driver Software for Mac OS 8.5.1/8.6/9.0/
9.1/9.2 Version 1.0 (“printer driver” in this manual) into your Macintosh.
1
Connect your Macintosh and the printer.
For the connections, refer to “Connecting to a computer (optional)” on
page 20.
2
Turn on the printer and start your Macintosh.
Note
Close all programs before running the installer.