Sony DPP-SV88 - Manual (Page 60)

60 GB
Setting the access speed to a CD-R/RW disc
You can set the write and read speed of the CD-R/RW disc drive.
Usually use the initial speed settings listed below. Only when the operations
are unstable, reduce the speed to the value in the parenthesis:
• CD-R write speed: X8 (X4)
• CD-RW write speed: X4 (X2)
• Read speed: X24 (X8)
1
Insert a CD-R/RW disc into CD-R/RW disc tray of the printer.
2
Press INPUT SELECT to turn on the CD-RW indicator.
3
Press MENU.
The Folder menu is displayed.
4
Press the arrow (B/b) button to select “SET” and press ENTER/
PRINT QTY.
The SET sub menu is displayed.
5
Press the arrow (V/v) button to select the item you want to
change, press the arrow (B/b) button to set the access speed,
and then press ENTER/PRINT QTY.
The message notifying you that the setting becomes effective after you
turn on the power next time is displayed.
6
Press ENTER/PRINT QTY.
7
Turn off the printer and then turn it on.
The access speed setting you have changed becomes effective.