KC HiLiTES Auxiliary Rear Fog Light Kit Instructions - Manual

KC HiLiTES, Inc.
Mounting Instructions For Your
Auxiliary Rear Fog Light Kit
Thank you for choosing KC HiLiTES for your vehicle. We take pride in building the
highest quality best engineered lighting systems possible. Your satisfaction with our
products is important. So if there are any questions, please feel free to call our
customer service line at 800-528-0950 (7 AM to 6 PM MST).
TOOLS NEEDED.....
Drill motor 12mm wrench Pliers
7/16” drill bits 17mm wrench Phillips screwdriver
MOUNTING INSTRUCTIONS…..
1. This light may be mounted anywhere at the rear of the vehicle provided it does not
obstruct other lighting or interfere with the exhaust.
2. If you have existing holes in the bumper, and they are located in an area that is
practical for mounting, then use one of those holes. This will make your installation
much faster by eliminating any necessary drilling.
3. If you do not have existing holes, then you must drill one 10mm hole (7/16" will also
work) in an appropriate location under the bumper.
4. Put the bolt up through the small slot in the bracket and then up through the hole in
the bumper securing it with a lock washer and nut.
5. Attach the light to the under side of the bracket and position it as desired. Secure
loosely with a washer and nut. Aiming instructions are on the installation instruction
sheet included in your package.